Benefits & Features: Economical, Light Weight, Battery Powered, 4 Digit Display, Batch & Cumulative Totals, Auto On-Off, Factory Calibrated for Petroleum Fuel, Choice of Gallons or Liters, FM Approved

Max Pressure Drop (at Max Flow in test conditions): 1.5 PSI

Accuracy (% of Reading) Factory Calibrated with Computer: ± 5%

Repeatability (based on test conditions): ± 0.5%

Recommended Strainer Size: ~35 Mesh (500 Microns)

Housing Material: Aluminum

Bearings: Ceramic

Shaft: Tungsten Carbide

Rotor: Nylon

Signal Generator: Ferrite

Retaining Rings: 316SS

Local Computer Calibrations: Factory Only

LCD Digits: 4

Totalizing Display Starting Increment: 0.1

Local Module & Output Signal: None

Remote Output: None

Sensor (Pickup): Magnetic

Battery Power: (2) AAA Alkaline Batteries

Totalizing Resets to 0 After Reaching: 9999

Display Function: 2 Totals (1 Resettable Batch, 1 Cumulative)

Applications (always check Chemical Compatibility Guide): Gasoline (up to 15% alcohol blends such as E15), Diesel Fuel (up to 20% biodiesel blends such as B20), Biodiesel (B100) and Kerosene.

Not Suitable For Applications: Water, chemicals, aircraft fuel and liquids

Application Notes: Unidirectional, Can mount Horizontally or Vertically, Can use for Gravity Feeds, Does not indicate rate of flow, Line must be full (no air) for proper accuracy

Shipping Weight (Approximate): 2.0 lbs (0.9kg)

Connection to Connection Length (OAL): 102 mm (4.0")

Approvals Notes: See catalog page for full approval specs