Benefits & Features: High Accuracy: ± 0.5% (Linearity), High Temperatures to 800°F, Low Temperatures to -450°F, Field Serviceable, Cleanable Internals. Includes 3' Cable.

Extended Flow Range: See pg 4 of manual for details

Max Pressure Drop (at Max Flow in test conditions): 4 PSI

Accuracy (% of Reading) Factory Calibrated with Computer: ± 0.5%

Repeatability (based on test conditions): ± 0.1%

Maximum Viscosity: 100 cps**

Recommended Strainer Size: 40 Mesh (420 Microns)

Max. Particle Size: .017" / .420 mm

Operating Temp Without Local Computer or With Remote Computer: -450 to 800°F (-268 to 426°C)

Housing Material: 316SS (limited availability)<br><br>Contact us for availability

Bearings: Tungsten Carbide

Shaft: Tungsten Carbide

Thrust Bearings: Tungsten Carbide

Rotor: CD4MCu Stainless Steel

Rotor Supports: 316SS

Signal Generator: Not Wetted

Retaining Rings: 302SS/316SS

Local Computer Calibrations: Factory

Local Module & Output Signal: None

Remote Output: 4-20mA Transmitter (GA500)

Sensor (Pickup): Magnetic

External Power: 2-Wire Loop Powered 8.5-35 VDC

Frequency Range: 100 - 1000 Hz

Typical K-Factor PPG (PPL): 2608

Applications (always check Chemical Compatibility Guide): Industrial Use, Water

Not Suitable For Applications: Oils, especially those heavier than 10W (100cps), Fluctuating viscosities**

Application Notes: Unidirectional, Can mount Horizontally or Vertically, Can use for Gravity Feeds, Line must be full (no air) for proper accuracy

Piping Notes: If pump, valve, etc. is upstream, need min. 14" Upstream

Minimum Straight Pipe Dia.s: 7.5" Upstream / 3.75" Downstream

Connection to Connection Length (OAL): 3.25" (82.6 mm)

Shipping Weight (Approximate): 6 lbs (2.7 kg)

GNT-75EHC-72

3/4" NPT Male 316SS (limited availability)Contact us for availability

4-20mA Output G Series - PRECISON METER - HIGH PRESS. & TEMP.

3/4" NPT Male 316SS (limited availability)

Contact us for availability