GSCPS-20020D-X1
2" Tri-Clamp 316SS (see new model)
Search for
GSCPS-200-DM-10F
Pulse Out G Series - PRECISON METER - 3-A APPROVED BODY
Main Specifications
Connection Size: 2"
Connection Type: Tri-Clamp
Flow Range: 33 - 330 GPM (125.0 - 1250 LPM)
See new model
Search for
GSCPS-200-DM-10F
See new model
Search for
GSCPS-200-DM-10F
Pressure Rating: 150 PSI (10.2 Bar)
Meter Body Size: 2"
Body Type: 3-A Approved
Local/Remote Display: None
Display Type: None
Factory Calibrated For: Water like fluids
Flow Meter Type: G Series - PRECISON METER - 3-A APPROVED BODY
Std Calibration Reports Included: Yes
Warranty Period: 1 Year
Product Type: Pulse Out
Benefits & Features: The body meets strict 3-A Sanitary Standards using the new "Third Party Verification" (TPV) program; Internals are machined or polished to meet 3-A self-draining and cleaning requirements (Ra32); CIP, SIP, COP; High Accuracy: ± 0.5% (Linearity); Field Serviceable; 6 Digit Display - Floating Decimal; Rate of Flow; Batch & Cumulative Totals; Factory Calibrated and Field Calibratable; Choice of Gallons or Liters; Custom Programmable Display (including UOM)
Extended Flow Range: See pg 4 of manual for details
Max Pressure Drop (at Max Flow in test conditions): 14 PSI
Accuracy (% of Reading) Factory Calibrated with Computer: ± 0.5%
Repeatability (based on test conditions): ± 0.1%
Maximum Viscosity: 100 cps**
Recommended Strainer Size: 14 Mesh (1410 Microns)
Max. Particle Size: .056" / 1.410 mm
Operating Temp Without Local Computer or With Remote Computer: -100 to 225°F (-74 to 107°C)*
Housing Material: 316SS (see new model)<br><br>Search for<br>GSCPS-200-DM-10F
Bearings: PEEK
Shaft: 316SS
Thrust Bearings: PEEK
Rotor: CD4MCu Stainless Steel
Rotor Supports: 316SS
Signal Generator: Not Wetted
Retaining Rings: 302SS/316SS
Local Computer Calibrations: Factory
Typical K-Factor PPG (PPL): 181
Local Module & Output Signal: None
Remote Output: None
Sensor (Pickup): Digital Magnetic (Requires Power: 5-32VDC)
Frequency Range: 100 - 1000 Hz
Applications (always check Chemical Compatibility Guide): 3A Approved Food & Beverage, Beer, Wine, Dairy
Application Notes: See page 5 in manual for 3-A Recommended Practices, Unidirectional, Line must be full (no air) for proper accuracy
Piping Notes: If pump, valve, etc. is upstream, need min. 40" Upstream
Minimum Straight Pipe Dia.s: 20" Upstream / 10" Downstream
Connection to Connection Length (OAL): 6.063" (154.0 mm)
Shipping Weight (Approximate): 8 lbs (3.6 kg)
Approvals Notes: Only the turbine body is 3-A Approved; See catalog page for full approval specs