GSCPS-200-DM-10F
2" Tri-Clamp 316SS
Pulse Out GSCPS Series - PRECISON METER - 3-A APPROVED BODY
$3300.00
Main Specifications
Connection Size: 2"
Connection Type: Tri-Clamp
Flow Range: 33 - 330 GPM
Pressure Rating: Limited by fitting size, clamp and temperature
Meter Body Size: 2"
Body Type: 3-A Approved
Local/Remote Display: None
Display Type: None
Factory Calibrated For: Water like fluids
Flow Meter Type: GSCPS Series - PRECISON METER - 3-A APPROVED BODY
Std Calibration Reports Included: Yes
Warranty Period: 1 Year
Product Type: Pulse Out
Benefits & Features: The body meets strict 3-A Sanitary Standards using the new "Third Party Verification" (TPV) program; Internals are machined or polished to meet 3-A self-draining and cleaning requirements (Ra32); CIP, SIP, COP; High Accuracy: ± 0.5% (Linearity); Field Serviceable; Rate of Flow; Batch & Cumulative Totals; Factory Calibrated and Field Calibratable; Choice of Gallons or Liters; Custom Programmable Display (including UOM)
Max Pressure Drop (at Max Flow in test conditions): 14 PSI
Accuracy (% of Reading) Factory Calibrated with Computer: ± 0.5%
Repeatability (based on test conditions): ± 0.1%
Recommended Strainer Size: 14 Mesh (1410 Microns)
Max. Particle Size: .056" / 1.410 mm
Maximum Viscosity: 100 cps<br>[For viscous fluids like oils, the temperature must not fluctuate more than ±5°F to avoid accuracy fluctuations]
Operating Temp Without Local Computer or With Remote Computer: -100 to 225°F (-74 to 107°C)<br>[SIP (Up to 1 hour) 285°F (140°C). Remove pickup, gaskets & clamps not rated to 285°F]
Housing Material: 316SS
Bearings: PEEK
Shaft: 316SS
Thrust Bearings: PEEK
Rotor: CD4MCu Stainless Steel (Nickel Plated)
Rotor Supports: 316SS
Signal Generator: Not Wetted
Retaining Rings: 302SS/316SS
Local Computer Calibrations: Factory
Local Module & Output Signal: None
Remote Output: (Pulse Out)
Sensor (Pickup): Digital Magnetic (Requires Power: 5-32VDC)
External Power: 5-32VDC
Frequency Range: 100 - 1000 Hz
Typical K-Factor PPG (PPL): 183
Applications (always check Chemical Compatibility Guide): 3A Approved Food & Beverage, Beer, Wine, Dairy
Piping Notes: If pump, valve, etc. is upstream, need min. 40" Upstream
Minimum Straight Pipe Dia.s: 20" Upstream / 10" Downstream
Application Notes: See page 5 in the manual for 3-A Recommended Practices, Unidirectional, Line must be full (no air) for proper accuracy
Connection to Connection Length (OAL): 6.063" (154.0 mm)
Shipping Weight (Approximate): 8 lbs (3.6 kg)
Approvals Notes: Only the turbine body is 3-A Approved; See catalog page for full approval specs