GG510-M
Local Mount Display with Pulse Out

(Limited Stock)

• Local mount Pulse Out Transmitter with battery powered display
• Works with the G, G2, and OM Series Flowmeters. (OM meters require factory installation only. G2 meters require 510 Adapter, please contact us.)
• Flow rate and totals in GPM. 9V Battery not included.
• Can rotate 180° Horizontally and 90° Vertically
• Accuracy: ±0.1% of reading; Primary Output: Open Collector (NPN); Pulse Out: Max. "OFF" Voltage: 60V Max. "ON" Current: 200 mA Max. "ON" Voltage Drop: <0.5 V @ 200 mA; Electrical: Strain Relief: Hubble PG7 Strain Relief Thread: Female 1/2-20 UNF-2B Local: No cable provided (510 Series only); Power Supply: 9-volt battery or externally powered Voltage Supply (Min.): 7 VDC Voltage Supply (Max.): 30 VDC; Input Options: Hall Effect, Reed Switch, Open Collector or Low Level Sine Wave; Mechanical Mounting Connections: Unit is mounted to meter body, 1" NPT; Frequency: Low Level Coil (LLC): 0 - 1000 Hz High Level Low Freq.: 0 - 150 Hz High Level High Freq.: 0 - 1000 Hz; Enclosure Rating: NEMA 4X / IP55; Calibratable by K-Factory Entry

14°F to 140°F (-10°C to 60°C)