OM006A511-821R5G
1/4" NPT Female Aluminum
Rate, Totals & 4-20mA Output OM Series - OVAL GEAR
$1236.00
Main Specifications
Connection Size: 1/4"
Connection Type: NPT Female
Flow Range: 0.5 - 27 GPH (2 - 100 LPH)
Pressure Rating: 220 PSI (15 Bar)
Operating Temp With Local Computer: 5 to 176°F (-15 to 80°C)
Meter Body Size: 1/4"
Local/Remote Display: Local
Display Type: Digital LCD (GRN Housing)
Flow Meter Type: OM Series - OVAL GEAR
Std Calibration Reports Included: Yes
Warranty Period: 1 Year
Product Type: Rate, Totals & 4-20mA Output
Benefits & Features: Excellent for applications with fluctuating or multiple viscosities - No field calibrating required; Accuracy: ± 1% Of Reading; Up to 1,000 cps Viscosity; No straight pipe requirements; Bi-directional; SS Rotors are very stable with increasing temperatures; 6 Digit Display - Floating Decimal; Rate of Flow; Batch & Cumulative Totals; Choice of Gallons or Liters; Custom Programmable Display (including UOM); Back-lighted Display when powered externally
Max Pressure Drop (at Max Flow in test conditions): Contact us
Accuracy (% of Reading) Factory Calibrated with Computer: ± 1% (±0.2% Opt'l) @ 3cp
Repeatability (based on test conditions): ± 0.03%
Maximum Viscosity: 1,000 cps
Recommended Strainer Size: 200 Mesh (75 Microns)
Max. Particle Size: .003" / .074 mm
Operating Temp Without Local Computer or With Remote Computer: 5 to 250°F (-15 to 120°C) [Opt'l]
Housing Material: Aluminum
Bearings: Carbon Ceramic
Shaft: Stainless Steel
Rotor: 316SS
Seals: FKM (Viton™)
Display Function: Rate + 2 Totals (1 Resettable, 1 Cumulative)
Totalizing Display Starting Increment: 0.01
Typical K-Factor PPG (PPL): 3975 (1050)
Local Module & Output Signal: 4-20 mA Output, Selectable Pulse Output (RT14)
Remote Output: None
Battery Power: (1) Lithium Thionyl Chloride 3.6V size AA battery (~3 years)
External Power: 12-30 VDC (optional)
Totalizing Resets to 0 After Reaching: 99999999
Sensor (Pickup): Reed Switch / Hall Effect<br>[Hall Effect Sensor requires dedicated power source]
LCD Digits: 8
Applications (always check Chemical Compatibility Guide): Metering clean fluids such as Oils, Grease, Fuels, Fuel Oils, Lubricating Liquids
Not Suitable For Applications: Water, dirty liquids
Minimum Straight Pipe Dia.s: None
Desired Straight Pipe Dia.s: None
Application Notes: The meter may be mounted horizontally or vertically but must be mounted, so the rotor shafts are in a horizontal plane (see manual), For viscous liquids, the maximum allowable flow may need to be reduced to ensure the pressure drop across the meter does NOT exceed 15 PSI, Viscosities <3cps, min. flow range is 10% of the maximum flow range, Line must be full (no air) for proper accuracy
Connection to Connection Length (OAL): 2.91" (74mm)
Shipping Weight (Approximate): 5 lbs (2.3 kg)
Approvals Notes: CE Approval is applied when meter is part of a system