Benefits & Features: Excellent for applications with fluctuating or multiple viscosities - No field calibrating required; Accuracy: ± 0.5% Of Reading; Up to 1,000 cps Viscosity; No straight pipe requirements; Bi-directional; PPS Rotors are immune to galling (adhesive wear); PPS Rotors produce less noise than metal rotors; 6 Digit Display - Floating Decimal; Rate of Flow; Batch & Cumulative Totals; Choice of Gallons or Liters; Custom Programmable Display (including UOM)

Max Pressure Drop (at Max Flow in test conditions): Contact us

Accuracy (% of Reading) Factory Calibrated with Computer: ± 0.5% (±0.2% Opt'l) @ 3cp

Repeatability (based on test conditions): ± 0.03%

Maximum Viscosity: 1,000 cps

Recommended Strainer Size: 100 Mesh (150 Microns)

Max. Particle Size: .006" / .149 mm

Operating Temp Without Local Computer or With Remote Computer: -4 to 250°F (-20 to 120°C) [Opt'l]

Housing Material: Aluminum (see new model)<br><br>Search for model<br> OM015A001-841R5G

Bearings: None

Shaft: Stainless Steel

Rotor: PPS

Seals: FKM (Viton™)

Display Function: Rate + 2 Totals (1 Resettable, 1 Cumulative)

LCD Digits: 6

Totalizing Display Starting Increment: 0.01

Typical K-Factor PPG (PPL): Reed: 318 (84), Hall Effect: 636 (138)

Local Module & Output Signal: 4-20 mA Transmitter (GX500)

Remote Output: None

Sensor (Pickup): Reed Switch / Hall Effect*

External Power: 2-Wire Loop Powered 8.5-35 VDC

Totalizing Resets to 0 After Reaching: 99999999

Applications (always check Chemical Compatibility Guide): Metering clean fluids such as Oils, Grease, Fuels, Fuel Oils, Lubricating Liquids

Not Suitable For Applications: Water, dirty liquids

Minimum Straight Pipe Dia.s: None

Desired Straight Pipe Dia.s: None

Application Notes: The meter may be mounted horizontally or vertically but must be mounted, so the rotor shafts are in a horizontal plane (see manual), For viscous liquids, the maximum allowable flow may need to be reduced to ensure the pressure drop across the meter does NOT exceed 15 PSI, Viscosities <3cps, min. flow range is 10% of the maximum flow range, Line must be full (no air) for proper accuracy

Connection to Connection Length (OAL): 7.4" (189mm)

Shipping Weight (Approximate): 10 lbs (4.5 kg)

Approvals Notes: CE Approval is applied when meter is part of a system

OM015A001-842G6

1/2" 150 lb ANSI Flange Aluminum (see new model)Search for model OM015A001-841R5G

Rate, Totals & 4-20mA Output OM Series - OVAL GEAR

1/2" 150 lb ANSI Flange Aluminum (see new model)

Search for model
OM015A001-841R5G