Benefits & Features: 2-Year Battery Powered, 6 Digit Display - Floating Decimal, Rate of Flow, Batch & Cumulative Totals, Factory Calibrated and Field Calibratable, User configurable for Unit Of Measure, such as GPM, LPM and more, Custom Programmable Display (including UOM)

Accuracy (% of Reading) Factory Calibrated with Computer: ± 3.0%

Recommended Strainer Size: ~120 Mesh (125 Microns)

Operating Temp Without Local Computer or With Remote Computer: 32 to 140°F (0 to 60°C) [Opt'l]

Housing Material: PVC

Bearings: Ceramic

Shaft: Tungsten Carbide

Rotor: PVDF

Signal Generator: Not Wetted

Retaining Rings: 316SS

Display Function: Rate, Velocity, 2 Totals (1 Resettable, 1 Cumulative)

Local Computer Calibrations: Factory & Field

LCD Digits: 6

Totalizing Display Starting Increment: 0.01

Local Module & Output Signal: None

Remote Output: None

Sensor (Pickup): Magnetic

Battery Power: (2) AAA 1.5V Alkaline Battery (2 year)

External Power: Optional

Frequency Range: 0.25 Hz - 3 kHz

Totalizing Resets to 0 After Reaching: 99999999

Typical K-Factor PPG (PPL): 565 (149)

Applications (always check Chemical Compatibility Guide): Waste Water, Water Treatment, Sub-Metering, Water Based Cooling Systems

Not Suitable For Applications: Fuels, Oils, DI Water, Freezing Medias

Application Notes: Unidirectional but Display can be rotated 180°, Can mount Horizontally or Vertically, Can use for Gravity Feeds, Accuracy can be improved with field calibration, Line must be full (no air) for proper accuracy, Do not allow fluid to freeze inside meter

Minimum Straight Pipe Dia.s: 10" Upstream / 5" Downstream

Piping Notes: Not recommended to connect to metal piping. A strap wrench is recommended for installation, otherwise housing will crack if overtightened. If cavitation affects accuracy, try a flow control valve downstream of the meter.

Connection to Connection Length (OAL): 6.6" (167 mm)

Shipping Weight (Approximate): 1.1 lbs (0.5 kg)

Approvals Notes: See catalog page for full approval specs